Portfolio Category: Wall Products

Armatherm™ FRR Structural Thermal Break Material

(Thermal Insulation Material - TIM) Armatherm™ FRR structural thermal break material provides a combination of low thermal conductivity and high compressive strength and has been used in hundreds of structural steel framing connections transferring load in moment and shear conditions. Armatherm™ FRR thermal break material can support up 40,000 psi and has an R value…
Read more

Armatherm™ 500 Structural Thermal Break Material

Armatherm™ 500 (Thermal Insulation Material - TIM) Reducing heat flow within a building’s thermal envelope reduces energy consumption as well as potential condensation issues. Armatherm™ 500 thermal break material (TIM) significantly reduces energy lost from thermal bridging in building envelope connections. Armatherm™ 500 structural thermal break material is a high strength, thermoset polyurethane manufactured in…
Read more

R-Guard Cat 5 Rain Screen

Cat 5 Rain Screen is a roller-applied air and waterproof barrier that produces a highly durable, seamless, elastomeric weatherproof membrane on exterior sheathing behind open-jointed or vented rainscreen cladding.

Read more

R-Guard AirDam

AirDam is an STP (silyl-terminated polymer) sealant formulated to create a long-lasting, weather-tight seal that prevents moist outside air from entering, and conditioned indoor air from escaping around window and door assemblies.

Read more

R-Guard Joint & Seam Filler

Joint & Seam Filler is designed to fill openings and create transitions where flexible reinforcement is required to bridge larger gaps and provide continuous support of fluid-applied flashing membranes, waterproofing or air barrier components.

Read more

R-Guard Spray Wrap MVP

Spray Wrap MVP is a fluid-applied air and water-resistive barrier that stops air and water leakage in cavity wall, masonry veneer construction, as well as in stucco, EIFS and most other building wall assemblies.

Read more

R-Guard Cat 5

Cat 5 is a primary air barrier designed for use over above-grade structural surfaces prepared with Joint & Seam Filler and FastFlash.

Read more

R-Guard FastFlash

FastFlash is a liquid flashing membrane available in gun or rollergrade. Use FastFlash in rough openings, to fill joints and seams, to counter-flash waterproofing and air barrier components in new or existing wall assemblies, and to seal around penetrations.

Read more

Armatherm™ Z Girt Structural Thermal Break

Thermal bridging is recognized as a significant factor in building envelope heat loss. It has been determined that the total heat flow through typical wall assemblies is underestimated by as much as 70% due to thermal bridging, yet simply adding insulation to walls has been proven to not necessarily decrease the energy use of a building.

Read more

EVO PANEL SYSTEM

Pleasing to the eyes, the budget and an architectural statement of simplicity, EVO™ is available in contemporary colours and shapes. EVO™ Wood, EVO™ Stone, and EVO™ Exotic are designed to replace the look of alternate product lines such as: wood grain, cementitious, and other metal panel types. Using various finishes and patterns within our proprietary…
Read more